Protect Your Vehicle With a Ghost Vehicle Immobiliser
A ghost immobiliser acts as a silent guardian against car thieves, safeguarding your car's security without the need for a second key. These systems cannot be detected by radio scanners, and are weatherproof.
Both Autowatch Ghost and CAN Phantom are fitted with an emergency PIN code that can be used in the event of the device being removed from the vehicle. They have been verified by TASSA (Tracking and Aftermarket Security System Association). They could lower the cost of insurance.
Protects your car from key copying, ECU swapping and other illegal activities
With car theft on the rise it is essential to ensure your car is safe from thieves who are constantly developing new tactics to bypass security systems. Whether that be cutting wires, using diagnostic scan tools or copying key fobs. One of the best ways to do this is to install an immobiliser for the ghost vehicle fitted.

The reason this modern-day device is extremely effective is the fact that it does not rely on alarms or the use of a key fob for its work. Instead it connects to your ECU and CAN data network to stop the vehicle from beginning, making it more difficult for thieves to steal cars, even when they have your keys.
The system works by utilizing buttons that are already on your steering wheel, centre console or door panels to generate an individual pin code sequence (which can be up to 20 presses) that must be entered before the car starts. This code is unique to you and is able to be changed at any time, making it impossible for thieves to figure it out or break it.
You can choose to add a service mode your pin code. This will allow you to start your vehicle and drive it without needing a PIN code. This is useful in the event of an emergency, like when your vehicle needs to be repaired or taken to the garage.
Another benefit of the system is that it can be paired with a call notification system that automatically alerts you when your vehicle has been damaged or stolen. It can be set to send you an text message or email and can also be connected to the GPS tracking device.
In a few instances, nimble thieves have been known to use jamming or spoofing equipment to bypass the Ghost system. However, this can be easily countered with advanced anti-jamming technology and vigilant monitoring of your vehicle.
It detects any an attempt to tamper with
The Ghost is designed to be concealed within the wiring loom in your vehicle, making it difficult for thieves to find. It connects to the vehicle's CAN network in order to stop key cloning or ECU swapping. However it is not detectable with the use of LED indicators or keyfobs. The device is also tamper proof and cannot be altered by wire cutters or other tools. Its compact size makes it easy to place anywhere in the car even inside the engine. It can be linked with an GPS tracker to add an extra layer of security.
It also can detect other immobilisers in your vehicle or altering the vehicle so that thieves be forced to wait a bit longer to take your vehicle. It is an effective tool to stop vehicle theft, especially for vehicles with costly modifications. It can be linked with an iPhone application that allows you to arm or disarm the device from a distance. You can also receive call alerts if someone tries to steal or tamper with your vehicle.
Many drivers opt to install an immobiliser ghost their vehicle for the added security it offers. It can stop key cloning, ECU swapping, and even relay attacks. It can be used in conjunction with a GPS tracker to enhance its effectiveness. The system can also be programmed to shut down the engine of your vehicle when it is moved from its normal position.
Some drivers have complained of problems with their stop/start function after installing the ghost, however these are generally isolated cases and do not necessarily indicate a problem with the immobiliser. However, it is crucial to make sure that the device has been installed by a reputable company and that it is compatible with your vehicle before purchasing.
The TASSA ghost II immobiliser, the latest technology in vehicle security will protect your vehicle against key cloning or ECU swapping. It can be paired with an iPhone application that can allow you to arm and disarm it remotely, as well as monitor your vehicle's health status. It also comes with a warranty of five years. It can be connected to your insurance policy to provide peace of mind.
Detects relay attacks
In the event of vehicle theft there are a variety of security solutions available. Particularly designed locks as well as tracking devices and ghost immobilisers are all readily available. These systems work by detecting the key fob's signal and stop the engine from running until a second PIN code is entered. They also shield the vehicle from cloning and hacking which makes them a powerful deterrent against determined thieves. However, there are ghost immobiliser review of ways that thieves attempt to circumvent these systems.
Relay attacks are a typical method used to disable vehicle immobilisers. This method involves two thieves who work together. One of them is close to the vehicle with a device which can pick up the signal from the key fob. The signal is then relayed to a device held close to the engine control unit. This tricked the system to believe that the key fob was nearby and allowed the thieves to start their vehicle.
The Autowatch Ghost Immobiliser, a CAN-based advanced system, is designed to stop these types of attacks. It is compatible with the vehicle's CAN (Controller Area Network) system and integrates seamlessly into the existing OEM security system. It works with the majority of vehicles and is silently able to stop ECU hacking as well as key cloning and theft. It is a cost-effective replacement for the security system that was originally installed.
The Ghost Immobiliser is unlike other security devices in that it does not utilize key-fobs or LED indicators. It is instead plugged into the wiring of the vehicle, making it hard for thieves to detect. It is also tamper-proof and will only be activated after it has received the PIN number of the owner of the vehicle. This makes it an excellent choice to protect vehicles from ECU hacking and the possibility of cloning.
The decision between the Ghost Immobiliser or the Relay Immobiliser is dependent on your individual preferences, as well as the level of safety you'd like for your car. The Ghost Immobiliser offers high security and is undetectable. the Relay Immobiliser has a simpler installation, but it does have some weaknesses. The decision is ultimately dependent on your requirements However, both are excellent options to protect your vehicle from theft.
Detects CAN bypass
The Autowatch Ghost immobiliser is a market-leading device that protects vehicles from key cloning, hacking and ECU swapping. It uses the existing CAN network in the vehicle to hide from thieves, and doesn't require additional wiring. It does not emit any signals that can be detected by scanning technology. This makes it an effective tool for modern theft methods. It can be used in conjunction with GPS tracking devices and physical locks to make a strong security against theft.
The Ghost is an extremely advanced immobiliser system that can be used to safeguard premium vehicles. It works by stopping the vehicle from being started until a PIN number along with the regular remote are entered. This makes it harder for thieves to rob the vehicle, and may even stop them. This is particularly beneficial for vehicles that were made to order or are costly models.
It can be mounted on a wide range of vehicles made by the major manufacturers. It is compatible with a variety of aftermarket parts. The device can be fitted by a professional, and is typically hidden in the engine bay or under the bonnet of the vehicle. It does not require cutting of the wiring or signalling systems, and it's weatherproof. It's a great option to safeguard your car's most precious possessions.
One of the major benefits of the Ghost is that it can be set to valet mode, so you can drive your car while it is being serviced or towing away to be repaired. This can be done with either a pin or a driver fob that you carry around. It is easy to change back to normal mode if you require to restart your car.
The Ghost has a further advantage: it cannot be detected with diagnostic tools or detected using the Stethoscope. This is because the Ghost does not transmit radio frequency signals as do other security systems. It blocks the engine using the data network of the vehicle and can only be activated with an individual PIN.